Is there a way to layout a square or define the angle of a corner point for platforms and slopes?  My job is a 6 acre sloping pad. The only info to go on is end and side lengths with instructions to have pad square with the property line.  Hard to draw exact edge lengths and get perfect rectangle by just drawing on the screen.  Sure its a simple solution that im missing.  Wes

Testing


  download.jpg (Size: 13.28 KB / Downloads: 36)

Currently it appears the only way to have a grid is with direct north/south coordinate lines.  This grid is utilized when exporting cut fill information to Autocad as a dwg file.  Frequently in autocad we use a user coordinate system, and when we do the grid information is not aligned with the user coordinate system due to its operation being hard coded to the actual coordinates.

It'd be useful if we could pick a user coordinate 0,0 and a user rotation for north / south, so that the cut/fill information on the grid drops in at a text rotation and at locations that is coordinated with our user coordinates in Autocad.  I can make all sorts of adjustments once it's exported, but I'd rather not have to do so.

Further, it'd be useful to be able to control the rotation and size of the fonts for the cut/fill information, and to have different layers for the cut, fill and no cut/no fill information so that they can be turned off and on without having to change them after export.  I'd also like to see the grid lines, cut/fill hatches and other lines be controllable with their own layers.

Doable?

Hey all, first time user here.  When I try to import contours from a dxf file, I get the following error: "Failed to open file:Could not load dxf". I've tried dxfs formatted for various versions of AutoCAD.  I get the same error each time.

If it helps come up with ideas, I'm also unable to paste contours directly into Kubla Cubed from AutoCAD or MicroStation.

Any advice would be helpful.

Thanks.

Hi

I am doing a complex earthworks takeoff for a retained embankment with defined batters, retaining walls, roads and table drains all adjacent each other.

I am able to do this by creating outlines for each surface (as none of them are level, all have cross falls and batters).

Each outline connects to the adjacent one at the same point (chainage cross sections at 50m inervals on a 1.2km length). Therefore where two outlines meet at the same point, I have to enter the elevation at that point twice, once for each outline. I tried the "interpolate" option but it did not work, I think because the outline was not within another outline with elevations.

Is there a way to set the elevations of the new adjacent outline using the elevations of the previous one already entered? i.e. not have to enter the same elevation twice where two outlines share the same point?


Thanks

I've looked through all the videos on the YouTube channel and i can't find one that covers this topic. My issue is that i have the existing conditions on one page and the proposed site plan on another page. All I've seen is how to stitch together a site plan shown on separate pages, but what i have is 100% of existing and 100% proposed elevation data on two separate drawings.

Does anyone have a link to a tutorial that will show me how to do this?

Thanks,

R

When aligning two points to orient a drawing there does not appear to be a way to mark two points on the existing layout to use to align to the new drawings.

Basically it appears you have to use the mouse to find the coords of the existing dwg, write these coords down, import the new dwg and then allocate these coords to the new dwg to align.

This seems pretty clunky, i would assume you can identify points on the existing drawing (plot them) and then reference these existing points on the new drawing to quickly orient the new drawing?

Am i missing something?

Thanks
Duncan

Can you calculate the volume of a spoil heap using the Lite version of Kubla ?

 I had tried to use Kubla Cubed software to helped me to calculate the volume of cut and fill needed for my company's project (325 acres road and embankment). However, when I attached the dxf format of the LIDAR data of this project, the Kubla Cubed software is unresponded to the dxf drawing data for adding the contour line in the software. May I request for the limitation of the file size to be used in this Kubla Cubed Software and kindly provide the advice and recommendations to solve these problems.

I have roads going through the project site.  The elevations given are at random intervals.  Since the roads are curved, I must use many more points to define the road layout than there are points with given elevations.  

1.  What is the best way to define the road depth?  

2.  Will Kubla interpolate the elevations of the points based on the given elevations?

3.  Should I use heights or levels to define the road beds?  

I have a part of the road that once I completed defining the road, Kubla set the elevations of the points on the "Levels" at a grade almost 20 feet deeper that anything that I have defined either existing or proposed.  I have attached the file so you can see what is happening.  

Thanks Djungst